INDUSTRIAL MICROHYDRAULICS
In
1991, The Lee Company founded the Industrial Microhydraulics (IMH) Division
to adapt its proven design concepts to meet the higher volume production,
performance and cost requirements of automotive and industrial hydraulic and
medical applications. Lee’s IMH products have been well received. Using
design techniques similar to those used for the Lee Plugs, valves,
restrictors and safety screens that have logged millions of flight hours in
aerospace applications, The IMH Division can now offer products of the same
reliability and consistent performance, in very high quantities. The Lee
Company continues to expand the product offerings in The IMH Division.
Should you need a product that is not shown, please contact a Lee Sales
Engineer to discuss your specific requirements.
 |
Betaplugs are the most successful method to seal drilled holes for critical applications. Over 100 million are in use where permanent leak-proof seals are required. |
 |
The IMH Chek™ is a threadless, cartridge-style insert designed for simple, low cost installation into manifolds, and is based on the same hard seat Lee Chek® designs used in flight control systems of almost every aircraft flying today. |
 |
Lee restrictors feature small size, precision performance and long life. Single orifice and multi-orifice models cover a wide range of restriction and can be customized to meet special requirements. |
 |
The IMH Screens are "last chance" safety screens designed to protect critical fluid control components against rogue contamination in high volume industrial and automotive applications. |
 |
The IMH Shuttle Valve is a miniature, economical and reliable solution to the problem of hydraulic isolation in manifolds. This valve is a compact, non-detented, selective design that is just 5.5mm in diameter and 12.2mm long, and is ideal as a signal for auxiliary functions, such as hydraulically released, spring applied brakes and load sensing applications. |
